• 15 Gallon Portable Eyewash/Drench Hose Unit, arca timur, guardian

    15 Gallon Portable Eyewash/Drench Hose Unit

    Application: Self-contained eyewash/drench hose unit is ideal for use in low traffic areas, and where a continuous supply of potable water is unavailable for plumbed units. 15 gallon pressurized unit is ideal for floor placement near any hazard, and delivers approximately 10 usable gallons (37.9 liters) of water for 15 minutes, thus complying with the provisions of ANSI Z358.1-2014 for eyewashes.

    Tank: 15 gallon stainless steel pressurized tank with 10 gallons (37.9 liters) usable capacity. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve.

    Eyewash Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter.

    Eyewash Valve: 1/2” IPS chrome plated brass stay-open ball valve with flag handle. Pressure regulator controls eyewash flow to 0.65 GPM for 15 minutes.

    Drench Hose Unit: Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single GS-Plus™ spray-type outlet head, self-closing valve with squeeze handle, and 6 ft. reinforced PVC hose.

    Operation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. After filling with water, pressurize unit to 80 PSI. If necessary, adjust pressure regulator to achieve maximum flow for 15 minutes. Unit should be inspected regularly and water should be changed at least once every six months. Filling instructions included.

    Weight: 35.6 lbs. empty, 118.9 lbs. filled.

    Sign: ANSI compliant identification sign permanently affixed to tank.

    Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field.

  • G1562HTR 15 Gallon Portable Eyewash/Drench Hose Unit with Heated Orange Insulation Jacket, arca timur, guardian

    15 Gallon Portable Eyewash/Drench Hose Unit with Heated Orange Insulation Jacket

    Application: Self-contained eyewash/drench hose unit is ideal for use in low traffic areas, and where a continuous supply of potable water is unavailable for plumbed units. Unit is heated and insulated to endure low or freezing temperatures over long periods of time. Unit is fully freeze-resistant and tempered, for both indoor and outdoor environments. 15 gallon pressurized unit is ideal for floor placement near any hazard, and delivers approximately 10 usable gallons (37.9 liters) of water for 15 minutes, thus complying with the provisions of ANSI Z358.1-2014 for eyewashes.

    Tank And Jacket: 15 gallon stainless steel pressurized tank with 10 gallons (37.9 liters) usable capacity. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Highly visible orange Diener Nylon insulation jacket is waterproof and mildew resistant.

    Heating Element: Silicone drum heater is attached to the tank with a spring latch. Water temperature inside of the tank is regulated by an onboard thermostat set to 65°F. Total amp draw is 3.33A and delivers 400W of power, which allows the unit to operate to temperatures as low as -20°F.

    Ground Fault Plug: Unit comes standard with a 15A Ground Fault Circuit Interrupter (GFCI) with manual reset connected to a 9 foot long cord.

    Eyewash Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter.

    Eyewash Valve: 1/2” IPS chrome plated brass three-way self-draining stay-open ball valve with stainless steel flag handle. Pressure regulator controls eyewash flow to 0.65 GPM for 15 minutes.

    Drench Hose Unit: Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single GS-Plus™ spray-type outlet head, self-closing valve with squeeze handle, and 6 ft. reinforced PVC hose.

    Operation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. After filling with water, pressurize unit to 80 PSI. If necessary, adjust pressure regulator to achieve maximum flow for 15 minutes. Unit should be inspected regularly and water should be changed at least once every six months. Filling instructions included.

    Weight: 41.5 lbs. empty, 124.8 lbs. filled.

    Sign: ANSI compliant identification sign permanently affixed to insulated jacket.

    Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in the field.

  • Guardian-G1540

    AquaGuard Gravity-Flow Portable Eyewash

    Application: Self-contained 16 gallon gravity-flow eyewash unit is ideal for use in low traffic areas, and where a continuous supply of potable water is unavailable for plumbed units. Rugged plastic tank is wall mountable near any hazard. Unit uses gravity to deliver approximately eight gallons (30 liters) of water for 15 minutes through dual spray heads, thus complying with the provisions of ANSI Z358.1-2014 for eyewashes.

    RM1,700.00
  • AquaGuard Gravity-Flow Portable Eyewash, 16 Gallon, arca timur, guardian

    AquaGuard Gravity-Flow Portable Eyewash, 16 Gallon

    Application: Self-contained 16 gallon gravity-flow eyewash unit is ideal for use in low traffic areas, and where a continuous supply of potable water is unavailable for plumbed units. Rugged plastic tank is wall mountable near any hazard. Unit uses gravity to deliver approximately eight gallons (30 liters) of water for 15 minutes through dual spray heads, thus complying with the provisions of ANSI Z358.1-2014 for eyewashes.

    Tank: 16 gallon capacity safety green polyethylene tank. Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit.

    Spray Head Assembly: Water flow is activated by pulling down on bright yellow eyewash tray. Integral full-flow nozzles deliver a soft spray of water. Swing tray up to storage position to stop water flow.

    Drain: Waste water is directed into drain opening in tank basin. Furnished with 3 ft. long drain hose in basin to direct discharge into floor drain, storage tank or other receptor.

    Mounting: Furnished with zinc plated steel bracket for mounting unit on wall. Unit can also be placed on countertop or other flat surface.

    Preparation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. Unit should be inspected regularly and water should be changed at least once every six months.

    Discharge Time: Eyewash delivers over 0.5 gallons per minute for 15 minutes.

    Weight: 13 lbs. (5.9 kg.) empty, 158 lbs. (71 kg.) full.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

  • AquaGuard Gravity-Flow Portable Eyewash, 16 Gallon, with Heated Orange Insulation Jacket, arca timur, guardian

    AquaGuard Gravity-Flow Portable Eyewash, 16 Gallon, with Heated Orange Insulation Jacket

    Application: Self-contained 16 gallon gravity-flow eyewash unit is ideal for use in low traffic areas, and where a continuous supply of potable water is unavailable for plumbed units. Unit is heated and insulated to endure low or freezing temperatures over long periods of time. Unit is fully freeze-resistant and tempered, for both indoor and outdoor environments. Rugged plastic tank is wall mountable near any hazard. Unit uses gravity to deliver approximately eight gallons (30 liters) of water for 15 minutes through dual spray heads, thus complying with the provisions of ANSI Z358.1-2014 for eyewashes.

    Tank And Jacket: 16 gallon capacity safety green polyethylene tank. Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit. Highly visible orange Diener Nylon insulation jacket is waterproof, mildew resistant, easily cleaned, quick drying, abrasion resistant and has excellent strength. Activation is easy with the nylon pull down strap that is secured in place by Velcro strips.

    Heating Pads: Heating pads are made of silicone rubber and are attached with pressure sensitive adhesive. Total amp draw of the unit is 4A and delivers 410 Watts of power, which allows the unit to operate to temperatures as low as -20°F.

    Electronic Temperature Controller: The electronic temperature controller has an easy to read LCD screen for viewing the temperature and a green LED status indication light to let the user know when the heating pads are activated. The controller is factory set at 80°F and has a keypad lockout feature.

    Ground Fault Plug: Unit comes standard with a highly visible yellow 15A GFCI Ground Fault Circuit Interrupter with manual reset connected to a 9 foot long cord.

    Spray Head Assembly: Water flow is activated by pulling down on bright yellow eyewash tray. Integral full-flow nozzles deliver a soft spray of water. Swing tray up to storage position to stop flow.

    Drain: Waste water is directed into drain opening in tank basin. Furnished with 3 ft. long drain hose in basin to direct discharge into floor drain, storage tank or other receptor.

    Mounting: Furnished with zinc plated steel bracket for mounting unit on wall. Unit can also be placed on countertop or other flat surface.

    Preparation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. Unit should be inspected regularly and water should be changed at least once every six months.

    Discharge Time: Eyewash delivers 0.5 gallons per minute for 15 minutes.

    Weight: 19 lbs. (8.6 kg.) empty, 164 lbs. (74 kg.) full.

    Quality Assurance: Unit is completely assembled, and electrically and water tested prior to shipment.

  • Barrier-Free Safety Station with WideArea™ Eye/Face Wash, Plastic Shower Head, arca timur, guardian

    Barrier-Free Safety Station with WideArea™ Eye/Face Wash, Plastic Shower Head

    Application: Barrier-Free combination WideArea™ eye/face wash and shower safety station. Shower head and pull rod are extended for improved access. Bowl is lowered and extended to permit access by wheelchair user. Profile of unit is “flattened” to comply with maximum height and knee clearance requirements.

    ADA Compliance: Unit complies with ADA requirements for accessibility by handicapped persons (maximum height and reach, minimum knee clearance and distance from obstructions).

    Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.

    Shower Valve: 1” IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 47-1/2” stainless steel pull rod.

    Spray Head Assembly: Four GS-Plus™ spray heads. Each head has a “flip-top” dust cover, internal flow control and filter to remove impurities from water flow.

    Eye/Face Wash Bowl: 11-1/8″ diameter stainless steel.

    Eye/Face Wash Valve: 1/2” IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.

    Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.

    Supply: 1-1/4″ NPT female top or side inlet.

    Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 9-1/4″ or 19-5/8″ above finished floor by reversing lower pipe nipples.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

  • Clear Vinyl Cover for AquaGuard 16 Gallon Portable Eyewash, arca timur, guardian

    Clear Vinyl Cover for AquaGuard 16 Gallon Portable Eyewash

    Application: Clear vinyl cover protects G1540 AquaGuard portable eyewash from dust and debris while maintaining unit visibility and making ANSI Z358.1 weekly visual inspections easy.

    Installation: Unit is designed for use with G1540 AquaGuard portable eyewash units. Cover features open top and bottom areas for easy installation.

    Cover: 16 gauge clear vinyl cover features stitched seams and velcro front flap for easy eyewash access. Front flap connects to eyewash tray with velcro strap for easy one-step activation.

  • Combination Flashing Light and Alarm Horn for Safety Stations, arca timur, guardian

    Combination Flashing Light and Alarm Horn for Safety Stations

    Application: Combination flashing light and alarm horn unit for safety stations. Flashing light activates and alarm horn sounds loudly when eyewash or shower is activated. Ideal for use in high traffic, industrial applications and areas with low ambient light.

    Installation: Unit is designed for use with combination safety stations, and can be mounted on either the vertical pipe of the station or on a wall adjacent to the unit. 120 volt, 0.48 amp electrical supply is required.

    Visual Signal: Weatherproof amber flashing light with shatter-resistant lens.

    Audible Signal: Weatherproof horn delivers distinctive, urgent signal. Volume is preset at 100 db at 10 feet. An adjustment screw on the front of horn allows adjustment of output sound level.

    Flow Switch: 1-1/4″ IPS single pole, double throw waterproof flow switch for installation in water supply line to emergency unit. Switch senses flow of water when either the eyewash or shower is activated. Flow switch must be installed with tee fitting in horizontal position, flow switch body in vertical position and at least 6″ from closest fitting. Direction of flow is marked on switch body.

    Mounting: Furnished complete with bracket for mounting on vertical pipe or wall, junction box and 5 foot flexible NEMA 4X cord and receptacle. Electrical connection by others.

    Quality Assurance: Unit is fully assembled, wired and factory tested prior to shipment.

  • Drench Hose Unit, Wall Mounted, arca timur, guardian

    Drench Hose Unit, Wall Mounted

    Application: Drench hose unit for wall mounting. Ideal for rinsing any part of user’s eye, face or body. Note: Under ANSI Z358.1-2014, drench hose units supplement, but do not replace, other types of emergency equipment.

    Spray Head: Single FS-Plus™ spray head. Spray head has “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

    Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released.

    Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.

    Mounting: Wall mounted hook holds unit on wall.

    Supply: 3/8″ NPT male swivel-type inlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Unit is completely assembled and water tested prior to shipment.

  • Emergency Shower, Free Standing, Plastic Shower Head, Guardian, Arca Timur

    Emergency Shower, Free Standing, Plastic Shower Head

    Application: Free standing emergency shower.
    Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.

    Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.

    Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.

    Supply: 1 1/4″ NPT female top or side inlet.

    Sign: ANSI-compliant identification sign.

  • Emergency Shower, Horizontally Mounted, All-Stainless Steel, arca timur, guardian

    Emergency Shower, Horizontally Mounted, All-Stainless Steel

    Application: All-stainless steel emergency shower for horizontal mounting. Ideal for use in areas where highly corrosive materials are handled, as well as in laboratory and clean room applications.

    Shower Head: 10″ diameter stainless steel with 20 GPM flow control.

    Valve: 1″ IPS stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.

    Pipe And Fittings: Schedule 40 stainless steel.

    Supply: 1″ NPT female inlet.

    Sign: ANSI-compliant identification sign.

  • Eye/Face Wash, Pedestal Mounted, Hand and Foot Control, Stainless Steel Bowl, arca timur, guardian

    Eye/Face Wash, Pedestal Mounted, Hand and Foot Control, Stainless Steel Bowl

    Application: Free standing, pedestal mounted eye/face wash with hand and foot control. Water flow is activated by either flag handle or foot treadle. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.

    Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

    Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position.

    Bowl: 11-1/8″ diameter stainless steel.

    Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.

    Supply: 1/2″ NPT female inlet.

    Waste: 1-1/4″ NPT female outlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Valve, bowl and spray head assembly is factory assembled and water tested prior to shipment.