-
Read moreQuick ViewGUARDIAN COMBINATION STROBE LIGHT AND ALARM HORN FOR RECESSED LABORATORY UNITS MODEL : AP280-230
- Application: Combination strobe light and alarm horn for recessed laboratory showers and combination safety stations. Strobe light activates and alarm horn sounds loudly when recessed eye/face wash or shower is activated. Alarm horn and light unit is recess mounted in wall. Ideal for use in finished spaces, including laboratories and cleanrooms.
- Installation: Unit is designed for use with recessed laboratory units. Combination light and alarm horn is recess mounted in wall. Flow switch and electrical wiring are located behind wall. 120 volt, 0.11 amp electrical supply is required
- Visual Signal: Amber strobe light with shatter-resistant lens.
- Audible Signal: Horn delivers distinctive, urgent signal at 90 db.
- Flow Switch: 1″ IPS single pole, double throw waterproof flow switch for installation in water supply line to emergency unit. Switch senses flow of water when either the eye/face wash or shower is activated. Flow switch must be installed with tee fitting in horizontal position, flow switch body in vertical position and at least 6″ from closest fitting. Direction of flow is marked on switch body.
- Mounting: Furnished with hardware for recess mounting components in finished wall. Electrical connections by others.
- Quality Assurance: All components are factory tested prior to shipment.
Read moreQuick View -
Read moreQuick ViewGUARDIAN DRENCH HOSE UNIT, DECK MOUNTED MODEL : G5020
Application: Drench hose unit for deck mounting. Ideal for rinsing any part of user’s eye, face or body. Note: Under ANSI Z358.1-2014, drench hose units supplement, but do not replace, other types of emergency equipment.
Spray Head: Single FS-Plus™ spray head. Spray head has “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position handle to face forward at all times.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- HG Undercounter hose guide bracket to prevent hose from tangling or binding.
- LC Locking clip for valve handle. Valve stays open until locking clip is released.
- VB In-line vacuum breaker for installation between valve and spray head.
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
Read moreQuick View -
Read moreQuick ViewGUARDIAN DRENCH HOSE UNIT, UNMOUNTED MODEL : G5010
Application: Unmounted drench hose. Ideal for rinsing any part of user’s eye, face or body. Note: Under ANSI Z358.1 – 2014, drench hose units supplement, but do not replace, other types of emergency equipment.
Spray Head: Single FS-Plus™ spray head. Spray head has “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released.
Hose: 8′ reinforced PVC hose. 275 PSI maximum working pressure.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- LC Locking clip for valve handle. Valve stays open until locking clip is released.
- VB In-line vacuum breaker for installation between valve and spray head.
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
Read moreQuick View -
Read moreQuick ViewGUARDIAN DRENCH HOSE UNIT, WALL MOUNTED MODEL : G5025
Application: Drench hose unit for wall mounting. Ideal for rinsing any part of user’s eye, face or body. Note: Under ANSI Z358.1-2014, drench hose units supplement, but do not replace, other types of emergency equipment.
Spray Head: Single FS-Plus™ spray head. Spray head has “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Wall mounted hook holds unit on wall.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- LC Locking clip for valve handle. Valve stays open until locking clip is released.
- VB In-line vacuum breaker for installation between valve and spray head.
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER WITH DRENCH HOSE, HORIZONTALLY MOUNTED, PLASTIC SHOWER HEAD MODEL : G1641
Application: Emergency shower for horizontal mounting with auxiliary hand-held drench hose unit.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Drench Hose Unit: Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single FS-Plus™ spray type outlet head, self-closing valve with squeeze handle, 8 ft. reinforced PVC hose and wall hook.
Pipe And Fittings: 1″ IPS galvanized steel with orange ABS plastic elbow.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- SSH Stainless steel shower head.
- PCC All-polished chrome plated brass construction.
- GRN Safety green ABS plastic shower head.
- YEL Safety yellow ABS plastic shower head.
- AP280-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for horizontal shower installation.
Read moreQuick View -
Read moreQuick ViewGuardian Emergency Shower, Free Standing, Plastic Shower Head MODEL : G1662
Application: Free standing emergency shower.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.
Supply: 1 1/4″ NPT female top or side inlet.
Sign: ANSI-compliant identification sign.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, FREE STANDING, STAINLESS STEEL CONSTRUCTION MODEL : G1696
Application: Free standing emergency shower. Ideal for use in areas where highly corrosive materials are handled, as well as in laboratory and clean room applications.
Shower Head: 10″ diameter stainless steel with 20 GPM flow control.
Valve: 1” IPS stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE seals. Furnished with stainless steel actuating arm and 29” stainless steel pull rod.
Pipe And Fittings: Schedule 40 stainless steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.
Supply: 1 1/4″ NPT female top or side inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for horizontal shower installation.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, HORIZONTALLY MOUNTED, ALL-STAINLESS STEEL MODEL : G1691
Application: All-stainless steel emergency shower for horizontal mounting. Ideal for use in areas where highly corrosive materials are handled, as well as in laboratory and clean room applications.
Shower Head: 10″ diameter stainless steel with 20 GPM flow control.
Valve: 1″ IPS stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Pipe And Fittings: Schedule 40 stainless steel.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- PSH Orange ABS plastic shower head.
- AP280-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for horizontal shower installation.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, HORIZONTALLY MOUNTED, PLASTIC SHOWER HEAD MODEL : G1643
Application: Emergency shower for horizontal mounting.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Pipe And Fittings: 1″ IPS galvanized steel nipple with orange ABS plastic elbow.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- PCC All-polished chrome plated brass construction.
- GRN Safety green ABS plastic shower head.
- YEL Safety yellow ABS plastic shower head.
- AP280-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for horizontal shower installation.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, RECESS MOUNTED, STAINLESS STEEL SHOWER HEAD MODEL : G1629
Application: Emergency shower for recess mounting in a finished ceiling or soffit. Shower is activated by rigid pull rod.
Shower Head: 10″ diameter with 20 GPM flow control and flange for flush mounting in ceiling. Shower head is stainless steel with stainless steel face plate.
Valve: 1″ IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm, 43″ stainless steel pull rod and stainless steel ceiling guide plate.
Pipe And Fittings: 1″ IPS galvanized steel.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
Note: ANSI Z358.1-2014 provides that shower heads be installed no more than 96″ above the finished floor. This unit should therefore not be installed in ceilings over 8 feet. For higher ceiling heights, we recommend the G1658 shower.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- AP280-230 Electric flashing light and alarm horn unit for recess mounting in finished wall. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, SEMI-CONCEALED, STAINLESS STEEL SHOWER HEAD AND PIPE MODEL : G1658
Application: Emergency shower for semi-concealed mounting in a finished ceiling. Unit is designed for installation in ceilings 8-10 feet above finished floor.
Shower Head: Shower head is 10″ diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height above finished floor.
Valve: 1″ IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm, 63 1/2″ stainless steel pull rod and stainless steel ceiling guide plate.
Pipe And Fittings: Exposed pipe and ceiling escutcheon are brushed stainless steel.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- PCC All-polished chrome plated brass construction.
- AP280-230 Electric flashing light and alarm horn unit for recess mounting in finished wall. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EMERGENCY SHOWER, VERTICALLY MOUNTED, PLASTIC SHOWER HEAD MODEL : G1635
Application: Emergency shower for vertical mounting.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GRN Safety green ABS plastic shower head.
- YEL Safety yellow ABS plastic shower head.
- AP280-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when shower is activated. Furnished complete with flow switch and mounting hardware.
Read moreQuick View