CENTURION RAPTOR
General purpose, lightweight spectacles, with soft, flat side frames. Ideal for use with head and ear defender protection.
- Soft, flat side frames
- Moulded nosebridge
Related Products
-
Read moreQuick ViewPROTECTA VERTICAL LIFELINE SYSTEM 45M
Protecta® Cabloc® Vertical Lifeline System consists of an 8 mm cable which is terminated at the top by a cable ferrule and cable clamps at the bottom.- Quick and easy to install
- Easy to configure to an existing ladder and/or pylon pole
- Versions available with or without inline shock absorber
- Cables are available in lengths from 5 to 200 m
Top bracket anchor is either of stainless steel or galvanised steel which is connected to two rungs of the ladder for spreading the load to provide increased strength. Likewise bottom bracket is also made either of those two steel types and designed with built in cable tensioning device.Cables are made either of stainless steel or galvanised steel. When using a stainless-steel cable, a version incorporating a shock absorber can be used which removes the need for an inline shock absorber. Intermediate cable guide secures the cable to prevent damage occurring and are made from stainless steel and rubber construction. This should be installing at every 10 m.Cabloc® traveller is designed either with or without shock absorber. This unit is lightweight and sits in the palm of hand. If this system available with shock absorber, then there is no need for external shock absorber unit. Inline energy absorber is either of stainless steel or plastic construction and it is rated for one user system.Read moreQuick View -
Read moreQuick ViewCenturion MagAir Lightweight Tyvek Hood Kit
Our complete respiratory Protection system, incorporating a lightweight headpiece with visor, specifically made with anti-static material and sealed seams for chemical resistance.
- 180 litres of Filtered air per minute
- Lightweight NiMH batteries, with a typical 8 hour usage before recharge
- Complete with a P2 Filter and 5 Pre Filters
- Over the course of 2017, you will see us deepen our commitment to global leadership in above the neck protection systems – re-branding the Martindale respiratory range under the Centurion name.
Read moreQuick View -
Read moreQuick ViewCenturion Reflex
For day-long comfort, our Reflex Safety Helmet offers a 6-point Nylon cradle, brushed nylon sweatband and ventilation – all as standard.
- Designed with safety in mind; supplied with a Silver rear Flash as standard. Also available with a High visibility Yellow or Orange rear Flash or as a complete High Visibility helmet
- 6 point Nylon Textile webbing, complete with Brushed Nylon sweatband with 2mm foam for comfort
Ratchet: Slip & Wheel
Venting: Vented
Eyewear: Retractable Eyeshield – sold separately
Read moreQuick View -
Read moreQuick ViewCenturion Nexus CORE
Our pioneering Nexus Core safety helmet combines advanced industrial safety standards with modern styling – including our Micro Peak for optimum visibility and Dry-Tech sweatband for all-day comfort.
- Modularity as standard. Simply by adding accessories, you can have one helmet style on site, with accessories to comply to different tasks.
- High performance ABS material and creative design enables -40°C low temperature performance, lateral deformation and optimal strength to weight ratio allows for a strong, protective helmet.
- Optimised “Micro” peak providing maximum upward visibility.
- Fully removable and adjustable EN 397 or EN 12492 4 point chinstrap accessories available for increased wearer comfort and hygiene.
- Premium Dry-Tech sweatband as standard for maximum comfort
Read moreQuick View -
Read moreQuick ViewCENTURION AIRPRO BUMP CAP
Our flagship AirPro bump cap has been designed for maximum breathability, maximum comfort and minimum weight, with approval to EN 812.
- Lower nape strap depth for optimum head retention
- One of the lightest Bump caps around at only 135g
- Designed to provide maximum breathability for increased coolness
- Corporate badging via embroidery or transfer print
- Treated with Dupont Teflon fabric protector, enabling small spills and grime to be easily wiped away
Read moreQuick View -
Read moreQuick ViewCenturion MagAir Fixed Shade Welding Shield Kit
Our out of the box solution to the demands of head and face protection whilst welding – a complete respiratory protection system, including a heat resistant welding shield with large flip front lense with integral chipping lens.
- Shade 10 Lens
- Chipping Lens: F
- Chipping Lens: F
- Lightweight NiMH batteries, with a typical 8 hour usage before recharge
- Over the course of 2017, you will see us deepen our commitment to global leadership in above the neck protection systems – re-branding the Martindale respiratory range under the Centurion name.
Read moreQuick View -
Read moreQuick ViewCENTURION CLASSIC 1100 HELMET MODEL : 1100
Approved To
EN 397: 440V a.c (unvented shell only), MM, -10°C
Key Features
Weight: 375g
Material: Shell: High Density Polyethylene (HDPE)
Peak Type: Full (40mm)
Internal Features: 6-Point Low Density Polyethylene (LDPE)
Product Code: S01C*A Full Peak Slip Non-Vented
S01C*C Full Peak Slip Non-Vented with Brushed Nylon Sweatband
S01E*F Full Peak Slip Vented
S01E*FC Full Peak Slip Vented with Brushed Nylon Sweatband
* Insert colour of helmet (i.e. W for White) – see colour stripRead moreQuick View -
Add to cartQuick ViewPROTECTA ANCHOR STRAP, MODEL : AM401G
RM50.00Portable anchors used in a variety of applications. Many are ‘choker’ style, designed to provide a safe and easy way to anchor a fall protection device to an overhead location that is beyond normal reach
Thimble ends:Corrosion resistant
PVC protective sleeve:Wears less than conventional sling
galvanised steel:light in weightAdd to cartQuick View -
Read moreQuick ViewCENTURION 1125 HELEMT
Centurion 1125 Classic General Purpose Safety Helmet is a hugely popular economy safety helmet. The hard hat provides robust protection against common site hazards. For example, protection against falling objects, bumps & bangs and working in a confined space. Well balanced, durable and dependable.
The helmet has a six-point sewn terylene cradle and a brushed nylon sweatband, so it is comfortable to wear. The hard hat itself is made from High Density Polyethylene (HDPE), and is available in a range of colours.
The Centurion 1125 Classic General Purpose Safety Helmet is available now at Safety Supplies. Call our friendly team today for further details and expert advice on all of your PPE and head protection needs.
Read moreQuick View
