DRAGER 6738778
DRAGER 6738778

DRAGER FILTER FOR USE WITH RESPIRATOR AIBIE1 MODEL : 6738778

3M FULL FACE RESPIRATOR 6800
DRAGER RETAINER MODEL : 6738038

Drager ABE1 Organik, İnorganik Asit Gaz Filtresi

Drager  ABE1 Filtre organik, inorganik asit ve gazlara karşı

30 x OEL veya 1000 ppm (hangisi daha düşükse) kadar organik / inorganik asit duman ve buhar konsantrasyonu.

Categories: ,

Related Products

  •
    Read more
    Quick View

    3M 6200 HALF FACE RESPIRATOR

    Details
    * This series combines comfort and convenience
    * Comfortable soft, lightweight facepiece with easy-to-adjust head straps
    * NIOSH approved for negative pressure air purifying and supplied air dual airline applications
    * Can be disassembled, cleaned and reused
    * Replaceable cartridges and filters allow reuse of facepiece for cost savings
    * Sizes are color coded for easy identification
    * For workplace/occupational use only

    Read more
    Quick View
  •
    Add to cart
    Quick View

    DELTAPLUS M1200VW, DISPOSABLE MASKS FFP2 FOR ORGANIC VAPOURS 10PC/BOX ( READY STOCK)
    Box of 10 active charcoal non woven synthetic fibre disposable masks FFP2 for organic vapours (for concentration < VME).Protection against harmful odours (welding fumes for example).Moulded mask.

    Nose clip for adjustment.

    Foam edge under nose clip.

    High performance exhalation valve.

    DOLOMIA optional test for longer continuous wear time.

    Mask: non-woven synthetic.

    Straps : Rubber. FFP2 NR D

    SIZE No size

    Authorized distributor of Delta Plus.

    RM90.00
    Add to cart
    Quick View
  •
    Read more
    Quick View

    DRAGER COMBI FILTER BAYONET (6738817) A1B1E1K1HGP3 R D

    Drager offer the ABEK P3 filter range as a means of protection from both toxic gases and vapours and also particles. This particular filter is an ABEK Class 1 Hg P3 R D filter which protects against a wide range of gases and particles.  See the spec table on the right for more information on the gases.

    The filters come in a pack of 2 and can be used with the X-plore 3300 & 3500 half masks and also the X-plore 5500 half mask.

    The filter class indicates the filters’ capacity and protects against class 1 gases and vapours.  To determine whether this filter is suitable for your application it’s important to know the maximum permissible concentration of the substance you’re working with and the occupational exposure limit.

    The coloured rings around the casing of the filter will help identify which gases the gas filter protects against and whether it is suitable for particles.  This particular ABEK filter can be reused (for more than one work shift), however it’s important that you’re able to tell when your filter has come to the end of its life and can no longer be used.

    KEY FEATURES

    • Sold in Pairs
    • Successfully passed a dolomite test
    • Can be used for protection in a wide range of applications
    • Easy to use and attach
    • Filters are secured in a top-down position
    • Maximum protection provided due to the individual packaging
    • Weight is 140g per piece
    • CE-certified (EN 14387, EN 143:2000/A1:2006)
    • Australian Standard AS /NZS 1716 certified (SAI Global)
    Read more
    Quick View
  •
    Read more
    Quick View

    DRAGER BAYONET A1B1E1K1 GAS FILTERS MULTIGAS CATRIDGE MODEL : 6738816

    Drager A1B1E1K1 bayonet filters protect against a range of harmful substances including class 1 organic gases and vapours (of boiling point >65°C), inorganic gases and vapours (including hydrogen sulphide, chlorine and hydrogen cyanide), sulphur dioxide and hydrogen chloride.  They also protect against ammonia and organic ammonia derivates.

    These particular filters are gas filters, which means they are not suitable for protection against particulates.  However, they can be converted using a particle or pad and adapter in order to make a combination filter.

    Bayonet filters from Drager Safety can be used with twin-filter masks. This includes the X-plore 3300 and 3500 half masks and also the X-plore 5500 full face mask.

    KEY FEATURES

    • Sold in Pairs
    • Can be used in an extensive range of industries and applications
    • Offer a high level of comfort and safety
    • Easy to use and safe to handle
    • Come with a tough ABS blue plastic housing
    • Secure filters in a top-down positioning
    • Weight approximately 110g per piece
    Read more
    Quick View
  •
    Read more
    Quick View

    DRAEGER HALF FACE RESPIRATOR X-PLORE MODEL : 3500

    This X-plore 3500 series large half-face mask with a drop-down next strap is made of DragerFlex and meets the NIOSH standard. It has a flexible nose area, double-layered faceseal, flexible nose sealing strip, innovative X-guided strap system, large visor, and a five-point harness. The bayonet filter half-mask is compatible with an X-plore line of cartridge filters.

     

    • ItemHalf Mask
    • Mask SizeLarge
    • Compatible with Brand and SeriesDrager X-plore 3500
    • Mask Headstrap TypeAdjustable
    • ColourBlack
    • IncludesResealable Storage Bag
    • Facepiece MaterialDragerFlex
    • SeriesX-plore 3500
    • Respirator Connection TypeBayonet
    • Disposable/ ReusableReusable
    • StandardsEN 140, NIOSH
    Read more
    Quick View
  •
    Read more
    Quick View

    Particulate Welding Respirator N95, with Faceseal, 80 ea/Case MODEL : 8212
    • NIOSH approved for at least 95% percent filtration efficiency against certain non-oil based particles
    • Recommended for welding and operations in which metal fumes may be present
    • Cake resistant filter layers reduce the caking of particles on the respirator surface
    • Adjustable noseclip helps provide a custom secure seal
    • 3M™ Cool Flow™ Exhalation Valve helps reduce heat build-up inside the respirator
    • Advanced Electret Media is designed for ease of breathing
    Read more
    Quick View
  •
    Read more
    Quick View

    FFP2V DRAGER X-PLORE 1720 MASK WITH ACTIVE CARBON
    • Flat-folded mask for space-saving storage and easy transport.
    • Dräger X-plore 1700 offers effective protection against fine dust as well as solid and liquid particles that are present in industry, mining, specialized trades, agriculture and services.
    • The specially developed CoolSAFE™ filter material combines various high-performance filter media to achieve an excellent filter performance.
    • Odour stopping utilize an additional activated carbon layer inside against unpleasant odours.
    • Breathing resistance remains very low, allowing the user to work easily and without tiring for longer periods.
    • Longer service life and reduces costs for the user, while maintaining a high degree of wearing comfort.
    • Easy and comfortable breathing: Thanks to a very low breathing resistance, it is particularly easy to breathe. Additionally, the specially engineered CoolMAX™ exhalation valve releases humid and warm exhaled air, preventing heat build-up underneath the mask, allowing you to stay cool.
    • Continuous loop head harness is constructed from a stable, elastic textile strap which is easy to don and doff while sitting comfortably and pressure-free. The soft, tear-proof elastic easily stretches to fit various head sizes and prevents hair entanglement.
    • Alongside the material’s filter performance, a secure seal without leakage is decisive in how effective the mask’s protection really is. Dräger X-plore 1700’s ergonomic form and soft material fits well to the face. In addition, the nose pad and nose clip effectively holds the mask in place in the critical areas around the nose. Fits, sits, and seals securely.
    • The inside fleece is soft and hypo-allergenic, and repels moisture thanks to its hydrophobic properties. This keeps breathing resistance low and comfort high, especially when used for longer periods of time.
    • EN 149:2001 Certified.
    Read more
    Quick View
  •
    Read more
    Quick View

    Particulate Respirator N95 80 EA/Case MODEL : 8210V
    • Proprietary 3M™ Cool Flow™ Valve helps keeps wearer cool
    • Cushioning nose foam
    • Adjustable noseclip helps provide a custom and secure seal
    • Advanced electrostatic media is designed for ease of breathing
    • Compatible with a variety of protective eyewear and hearing protection
    Read more
    Quick View
  •
    Read more
    Quick View

    Particulate Respirator N95, with Nuisance Level Organic Vapor Relief 80 EA/Case MODEL : 8514
    • Used in certain applications involving metal fumes
    • Flame resistant per modified ASTM D2859 (not a substitute for a faceshield)
    • Carbon filter layer reduces exposure to nuisance level odors
    • 3M™ Cool Flow™ Exhalation Valve reduces heat build-up inside the respirator
    • Soft nose foam; adjustable noseclip and straps
    Read more
    Quick View
  •
    Read more
    Quick View

    DRAGER RETAINER MODEL : 6738038

    Developed in close cooperation with industrial users worldwide the Draeger X-plore® Twinfilter product range sets a new benchmark in comfort and handling. The Draeger X-plore® Twinfilter range ideally combines safe and easy handling with wearable comfort. Newly developed materials and a modern practical design ensure the highest level of user acceptance. The harness innovative X-structure provides optimum weight distribution, creating a safe, even seal all round without pressure points comfort guaranteed. See for yourself and experience a new dimension in comfort and safety in respiratory protection.

    Read more
    Quick View