• Read more
    Quick View

    GUARDIAN HEATED SAFETY STATION WITH EYEWASH, BOTTOM INLET, RATED FOR CLASS I, DIVISION 2 ENVIRONMENT MODEL : GFR3110
    • Meets the provisions of ANSI Z358.1-2014 as both an emergency eye wash and shower
    • FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D
    • For rapid first aid after an accident to prevent contamination of the body and eyes
    • Easy operation of the emergency shower with a stainless steel handle
    • The aerated plastic water jets ensure the water is a gentle spray
    • Water flow for body shower: 20 GPM, water connection 1 1/4″ NPT
    • Eye wash with 2 spray nozzles with self-regulating flow control, filter and dust covers
    • Simple operation of the eyewash with flag handle
    • Water flow for eye shower: > 3.2 GPM at 30 PSI
    • Heat-tracing cable wraps around internal pipe and activates when pipe temperature falls below 75° F to maintain tepid water within unit
    • Galvanized steel piping with UV-resistant orange ABS plastic jacket and polywthylene foam insulation
    • Requires 120 VAC single phase power supply (240V option also available)
    • With Bottom Inlet
    Read more
    Quick View
  •
    Read more
    Quick View

    GUARDIAN HEATED SAFETY STATION WITH EYEWASH, TOP INLET, RATED FOR CLASE I, DIVISION 2 ENVIRONMENT MODEL : GFR3100
    Guardian Safety – Heated Safety Station with Eyewash, Top Inlet, Rated for Class I, Division 2 Environment

    Application: Electric heat-traced stations prevent freezing even in extreme conditions. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40°F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014.

    Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 75°F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.

    Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single phase power supply.

    Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless steel screws for easy maintenance.

    Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.

    Shower Valve: 1″ IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29″ stainless steel pull rod.

    Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.

    Eyewash Valve: 1/2″ IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2″ NPT port to drain water from spray heads after use.

    Pipe And Fittings: Schedule 40 galvanized steel.

    Supply: 1-1/4″ NPT female top inlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.

    Read more
    Quick View
  • Heated Safety Station with Eyewash, Top Inlet, Rated for Class I, Division 1 Environment, Arca Timur
    Read more
    Quick View

    GUARDIAN HEATED SAFETY STATION WITH EYEWASH, TOP INLET, RATED FOR CLASS I, DIVISION 1 ENVIRONMENT MODEL : GFR3200

    Application: Class I, Division 1 rated electric heat-traced stations prevent freezing in extremely hazardous, cold weather conditions where flammable gases are routinely expected. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40°F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014.

    Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 50°F. FM, UL, and CSA approved for Class I, Division 1, Groups B, C, and D.

    Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 1, Groups B, C, and D. Requires 120 VAC single phase power supply. Heat-trace indicator light included. Note: In order to meet Class I, Division 1 requirements, approved conduit and fittings must be used during installation.

    Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections are secured with removable stainless steel screws for easy maintenance.

    Shower Head: 10” diameter orange ABS plastic with 20 GPM flow control.

    Shower Valve: 1” IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29” stainless steel pull rod.

    Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.

    Eyewash Valve: 1/2” IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2” NPT port to drain water from spray heads after use.

    Pipe And Fittings: Schedule 40 galvanized steel.

    Supply: 1-1/4” NPT female top inlet.

    Sign: ANSI-compliant identification sign.

    Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.

    Read more
    Quick View