• eFlex-Double-RackEnd-BarriereFlex-Double-RackEnd-Barrier

    A-SAFE eFlex™ Double RackEnd Barrier

    The eFlex™ Double RackEnd Barrier is designed to protect the ends of racking aisles, where turning vehicles and equipment can impact vulnerable racking structures.

    It absorbs and deflects repeated impacts and is ideal for facilities where heavier vehicles with a higher ground clearance are in operation.

    eFlex™ Double RackEnd Barriers feature circular end posts to provide enhanced protection at the barrier ends, which are more susceptible to impact. Spinning collars on the posts further deflect and dissipate impact forces.

    * Available in various lengths and with yellow rails and posts as standard. Suitable for vehicles with an impact height of 185 – 405mm.

  • A-SAFE iFlex™ Swing Gate

    iFlex™ Swing Gate provides safe access and exit points for pedestrians. Swing Gates act as a physical stop so the pedestrian has to pause and open the gate, rather than walking straight across a crossing point without checking for potential hazards.

    A hydraulic self-close automatically returns the gate to its closed position after use to maintain safety. The gates have a double swing action but are also supplied with gate stops. These can be configured to limit movement to one direction and force pedestrians to pause and pull the gate towards them.

    Swing Gates are compatible with all A-SAFE pedestrian segregation barriers. They can be installed individually or in pairs to increase the size of the opening.

    *Available in short or long variants for different usages.

  • A-SAFE PEDESTRIAN BARRIER

    Pedestrian +3 iFlex Barrier will segregate pedestrians from work
    vehicles and clearly define walkways from traffic routes.

  • ARIANA HORIZONTAL LIFELINE EN795C

    ARIANA horizontal lifeline EN795C PRINCIPE D INSTALLATION ARIANA General-purpose anchor plate. ref : AN Pretension end. ref : AN Swage end. ref : AN ARIANA shuttle. ref : AN Intermediate recovery part or P.A.S. ref : AN Turn element. ref : AN Anchor plate for post. ref : AN Cable. ref : AN Swageless pretensioner. ref : AN707/ Swageless end. ref : AN709/ Energy absorption element. ref : AN Standard post. ref : AM250/500 HOW TO USE A shuttle (P/N AN700) slides along a cable attached permanently to a structure. Connected to the shuttle by an interconnecting part such as a lanyard provided with an energy absorber or a fall arrest system, the user can move safely along the system without needing to unhook. QUALITY CONTROL On each batch of components, the PROTECTA INTERNATIONAL quality department carries out breakage tests and checks conforming to the requirements of the procedures validated by ISO 9001 certification. The set of fixed components forming part of the ARIANA system, such as : cable, intermediate recovery part, pretension system, energy absorber, clevis, anchorage plate and turn element, all of stainless steel. CARACTERISTIC Horizontal, rectilinear and/or curved use, Slope to 15, all configurations possible, suitable for assembly on any type of support. – Number of users : 5 persons – Intermediate recovery : maximum distance 15 m. -Breaking strength > 37 kn. -Pretension 80 dan. The ARIANA system is in conformity with the EN795 CLASS C standard concerning anchorage devices. The notified APAVE organization has issued the conformity certificate number C A U T I O N A cable slope not exceeding 15 is standard. To limit the risk of an accident due to the pendulum effect, it is advisable to place the shuttle vertically above the working area

  • iFlex BollardiFlex Bollard

    ASAFE IFLEX BOLLARD

    iFlex™ Bollards are designed to protect structures and equipment from vehicle impact damage. They provide a robust physical presence to prevent access or guide vehicles and pedestrians.

    iFlex Bollards are strong, durable and highly visible. They reinforce a driver’s attention to safe driving and can also act as guidance along traffic routes. A-SAFE Bollards are multi-functional and used extensively in industrial, commercial and public environments.

  • mFlex Double Traffic BarriermFlex Double Traffic Barrier

    ASAFE MFLEX DOUBLE TRAFFIC BARRIER

    mFlex™ Double Traffic Barrier is designed to safeguard walls, structures, goods and machinery from lightweight hand operated equipment and powered pallet trucks.

    Double rails increases the height and strength of the impact zone, providing greater impact resistance and improving protection against general wear and tear. Over time, frequent impacts can damage surfaces, materials and stock. It can even break expensive equipment.

  • BRADY, B30C-3000-595-WT 3 IN X 100 FT CONTINUOUS INDOOR OUTDOOR VINYL LABELS

    • Highly pliable material with high-tack permanent adhesive for rough, highly textured, dirty and harsh environment surfaces–including outdoors
    • Conforms and adheres to “difficult” surfaces like painted cinder blocks, painted wood, textured plastic, paper-jacketed pipes and blow-molded cases
    • Resistant to exposure to chemicals, greases and oils, salt spray, cleaners and detergents and general industrial grime
    • 8-10 year average outdoor durability in temperatures from -40°F to 180°F (-40°C to 82°C);can be applied as low as 0°F (-18°C)
    • A ribbon is required to print this material. Use Part Number B30-R10000
  • BRADY, B30C-500-569-YL

    • Durable, ultra-smooth polyester labels with permanent pressure sensitive acrylic adhesive
    • Outdoor grade polyester tape can be thermal transfer printed
    • Withstands mild chemicals, oil and water
    • Service temperature of -40°F to 212°F (-40°C to 100°C)
    • A ribbon is required to print this material. Use Part Number B30-R10000
  • MARTOR SAFETY KNIFE – SECUNORM MIZAR MODEL : H-8790

    The slimline SECUNORM MIZAR is your gateway into our world of quality squeeze-grip knives. Instead of a slider, a lever is responsible for releasing the blade. Squeeze and cut. Thanks to a relatively large cutting depth, you can use this safety knife to cut all common cutting materials. Efficiently. Its slender, no-fuss form, simultaneously allows a wide variety of cutting styles.

  • TRIPOD MODEL : AM100

    8 ft. (2.4 m) aluminum tripod with adjustable locking legs, safety chain and skid-proof feet.

    When it comes to confined space entry/rescue, it is essential that equipment operates perfectly and quickly. Lightweight, portable Protecta® aluminum tripods are ideal for confined space manhole entry and retrieval. They’re easily transported from one location to another and can be set-up by one worker. Attach one or two mechanical devices such as a winch or 3-way self retracting lifeline and you’re ready to go. Our tripods are loaded with features such as locking legs, simple detent pin style adjustment, quick-mount mechanical device bracket and skid resistant tread plate soles on feet.

    • 2.35 m (8 ft.) aluminium tripod
    • Telescoping adjustable locking legs
    • Skid-proof tread plate soles on feet
    • Safety leg support chain