HONEYWELL MILLER ENERGY ABSORBING LANYARD, 32MM MB 9007
Fall protection lanyard. Twin rope with type 2 energy absorbing lanyard with two double lock scaffolding hooks (50mm opening) and auto-twist carabiner.
Related Products
-
Read moreQuick ViewNANO-LOK
- A built-in RFID identification tag helps the user record and store information on inspections
- Allows user to “leap-frog” while moving from one location to another for added mobility and 100% fall protection
- Installs to the webbing of harness, leaving the dorsal D-ring open for other equipment or rescue Designed to provide a snug fit to the worker’s back, eliminating nuisance flopping
- The devices are virtually unnoticeable on your back, stay out of the way and can be easily used as a lanyard replacement
- 9 ft (274m) twin-leg lifelines with 3/4″ (19mm) Dyneema fiber and polyester web and aluminum locking rebar hooks, quick connector for harness mounting
- For industrial/occupational use only. Not for consumer sale or use
Read moreQuick View -
Read moreQuick ViewHorizontal Lifeline / Installation / Inspection
3M™ DBI-SALA® EZ-Line™ Retractable Horizontal Lifeline System 7605060
- 60 ft. (18.3 m) retractable system can be set at any length
- Rugged 1/4″ (6.3mm) 7×19 galvanized cable lifeline
- Ergonomic easy to carry case
- Extremely lightweight and portable design
3M™ DBI-SALA® Sayfline™ Permanent Multi-Span Horizontal Lifeline System 7603070
- Off the shelf permanent multi-span horizontal system designed for user installation
- 100 ft. (30.5 m) system includes all mounting hardware (order sleeve separately)
- Corrosion resistant 3/8″ (9.5mm) 7×19 stainless steel cable lifeline (galvanized steel also available)
- Bypassable intermediate brackets – one per 30 ft. (9.1m) span included (additional available model 7608001)
3M™ DBI-SALA® Nano-Lok™ Twin-Leg Quick Connect Self Retracting Lifeline, Web 3101280
- Lightest ANSI certified personal SRL that allows for knee level tie-off
- Smart activating brake system combines ANSI Class A & B to provide fall clearance as low as 4 ft.- up to 13 ft. less than lanyards
- Lightweight speed connect system reduces connect and disconnect time by up to 60%
- Durable nitrile rubber energy absorber cover designed to last 4 times longer
- Reduced energy abosorber size is more user friendly and convenient
- Twin-leg, 6 ft. (1.8m) 3/4″ (19mm) Dyneema® fiber and polyester web lifeline
- AAF 900lbs and MAF 1,350lbs
- Down to knee level tie-off for 310lbs. capacity, 420lbs. capcity shoulder height and higher
- Self-locking steel rebar hooks on lifelines
- 3M™ Connected Safety ID (CSID) equipped
- Wide variety of configurations available
6 ft. (1.8m) twin-leg lifelines with 3/4″ (19mm) Dyneema® fiber and polyester web and steel rebar hooks, quick connector for harness mounting.
Nano Lok™ is ergonomically designed for ease of use and is ideal for direct connection to most harnesses. The extremely compact and lightweight design is virtually unnoticeable on your back, staying out of the worker’s way and making it ideal as a lanyard replacement. Whether your application requires single or twin leg configurations, mounting to an overhead anchor or for connection directly to harness, there are more than 30 models to choose from to suit almost any application. Nano Lok™ locks quickly—stopping a fall within inches—providing more protection at low heights. In addition, tension is always kept on the lifeline, which reduces dragging, snapping and trip falls. Both features are key safety improvements.
Read moreQuick View -
Read moreQuick ViewDBI-SALA ADVANCED COUNTERWEIGHT DAVIT BASE MODEL : 8512894 MID YEAR PROMO
The Advanced Counterweight System is composed of a central base unit to
accommodate a variety of anchoring options, positioning and adjustment
legs, and extension assemblies. Anchoring options include a weight rack
for counter balanced applications, and a wheel pad assembly to allow
counter balance of the unit with an attendant vechicle.
Read moreQuick View -
Read moreQuick ViewSTYLE POSITIONING HARNESS, LOOPS UNIVERSAL, 1 EA MODEL : 1102025
Back and side D-rings, tongue buckle leg straps, loops for belt (size Universal).
Delta™ harnesses combine a set of “industry-first” advancements, with popular features making them the workhorse of the industry. Today’s Delta™ represents the culmination of more than twenty years of design, research, manufacturing know-how and on-the-job performance. Delta™ harnesses are as tough as the guys who wear them. They feature coated, corrosion-resistant hardware, water-repellant and abrasion-resistant webbing and a build quality that is second to none. A patented triangular design gives Delta™ harnesses a shape of their own, so you can don them quickly and easily. Throw it in the tool-box or in the back of your truck, think you can tangle it? Just pick it up and it’s ready to put on, tangle-free. The Delta™ pad also incorporates a web spreading design, positioning webbing wider apart on shoulder straps to eliminate abrasion on your neck.
- No-tangle design
- Stand-up back D-ring
- Side D-rings
- Tongue buckle leg straps
Read moreQuick View -
Add to cartQuick View3M DBI-SALA ISO CONTAINER FALL ARREST POST MODEL: 8563161
RM10,800.00- The unique CE certified fall restraint solution.
- Compatible with all ISO certified containers.
- Provides an elevated anchorage point reducing fall clearance requirements.
- Ensures total fall protection solution, even while working on a single container.
- No tools or container modification required.
Any application requiring workers to be on the top of an ISO Container: inspection, repair, maintenance, equipment fitting. DBI Sala is the world’s global leader in the production of fall protection equipment available over a number of stores. Fall arrest post is a kind of safety equipment which is intended for the fall protection.
Fall arrest post is basically intended to be used where there are higher chances of component getting fall down. This is basically a kind of vertical post which is providing the support from its sides with which the component which is to be saved can be tied.
DBI Sala Advanced ISO Container Fall Arrest Post is basically intended to arrest the fall of the ISO container. Many times there are chances of hazards if the container falls due to the presence of the corresponding substance in the respective container.
This fall arrest post is quite compact and hence there are chances for transporting the same quite easily. One can transport it to the location where the required safety is to be provided to be used in the respective location. The post is allowing protection of 360 degrees for about 3 workers.
The design is similar to a telescopic in nature with the feature of built-in levelling system. Material which is used is lightweight, corrosion resistant aluminium construction. It consists of a capacity of about 3 people of 136 kgs with a physical weight of 40 lbs.
Add to cartQuick View -
Read moreQuick ViewSKYLOTEC RESCUE KIT MILAN 2.0 POWER MODEL : SET-357-40
Art. no.: SET-357-40
EAN: 4030281285830
E-class number: 40-02-90-01
Customs no.: 84251900
DIMENSIONS
Size: 40m
Weight: 7,21 kg
COMPONENTS
Set of components:
1 x MILAN 2.0 POWER A-029
1 x MILAN ROPE L-0520-40
1 x LOOP 26 kN L-0008-1
1 x DRYBAG ACS-0014-OR-MRead moreQuick View -
Read moreQuick ViewASCORD SLIDING GUIDED FALL ARRESTER ON Ø 14 MM, 1 AM002 KARABINER MODEL : AN065
Fall arrester sliding on anchorage line stranded rope Ø 14 mm (rope sold separately). Opening type fall
arrester equipped with automatic locking, non-inverting device, energy absorber with fall indicator. 1
carabiner AM002.
Stainless steel.
COLOUR
Steel
SIZE
No sizeRead moreQuick View -
Add to cartQuick ViewHONEYWELL MILLER SHADOW BEAM ANCHOR MODEL : 8815-24
RM1,800.00Fits Flange Size 12″ to 24′
HONEYWELL MILLER SHADOW BEAM ANCHOR MODEL : 8815-24
ADJUSTABLE AND FIXED BEAM ANCHORS
Miller Shadow™ Adjustable and Fixed Beam Anchors connect horizontally to a wide range of I and H beam flanges.
MAXIMUM PRODUCTIVITY
The adjustable beam anchor slides smoothly the beam to provide the worker with effortless range of motion.
FIRM GRIP
The fixed beam anchors work horizontally or vertically: firmly gripping the beam or column to provide a temporary or permanent anchorage attachment.
WIDE RANGE
It connects horizontally to a wide range of beam langes from 3 inches (76 mm) to 24 inches (610 mm) wide and up to 2-1/2 inches (64 mm) thick.
Features & Benefits:
– Quick-click adjustment that is easy to use and requires no loose pins
– Available in stainless steel and high-strength bronze construction for longer service life
– Unique positive-locking engagement system for I-beam fall protection safety
– Accommodates both snap-hooks and carabiners for ease of use
Add to cartQuick View -
Read moreQuick ViewEZ-STOP 100% TIE-OFF SHOCK ABSORBING LANYARD MODEL : 1246193
6 ft. (1.8m) elastic web double-leg 100% tie-off with aluminum snap hook at center, aluminum rebar hooks at leg ends. EZ Stop shock absorbing lanyards combine a set of “industry first” advancements, with popular features making them the workhorse of the industry. Today’s EZ Stop represents the culmination of decades of design, research, manufacturing know how and on the job performance. EZ Stop lanyards are as tough as the guys who use them. They feature world’s smallest and lightest shock absorber, water repellant and abrasion resistant webbing and a build quality that is second to none. In addition, our exclusive Vectran energy management materials provide second to none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and it’s unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way even with gloves on. * 6 ft. (1.8m) double-leg 100% tie-off lanyard * Stretches in reaction to your movements * Extremely compact and lightweight * Exclusive Vectran energy absorption system
Read moreQuick View -
Read moreQuick ViewFULL BODY HARNESS MODEL : 1390033
Specifications
1. Attachment one chest & dorsal d-ring for rescue & fall arrest, side d-ring for work positioning
2. Adaptability adjustable chest and thigh strips
3. Ergonomic ideally positioned sit-strap for extended comfort
4. Material 44mm polyester web
5. Colour dual-color webbing for easy wearingFeatures
1. Economically priced that meet CE performance standard
2. Universal sized harness that fits most shapes and sizes
3. Polyester webbing for durability
4. Polyamide twisted rope lanyard 12mmDetails
- 1 chest & D-ring for rescue & Fall arrest, belt for work positioning
- Adjustable chest and thigh strips
- Dual-color webbing for easy wearing
- Ideally positioned sit-strap for extended comfort
- Net weight: 2,100g
- Material: Strap: 44mm Polyamide web
- -Static strength: >15kN
Read moreQuick View