-
Read moreQuick ViewGUARDIAN MODESTY CURTAIN FOR RECESSED LABORATORY UNITS MODEL : AP250-065
Application: In an emergency, it is imperative that contaminated clothing be removed as quickly as possible. However, employees may be reluctant to remove their clothing in the presence of co-workers. A modesty curtain will protect the privacy of the user and permit disrobing while the shower unit is in operation. The curtain has a pocket in which a smock can be stored.
Installation: Unit is designed for use with recessed laboratory units, including emergency showers and combination safety stations. Furnished complete with stainless steel track assembly for wall mounting. All necessary mounting brackets are included.
Curtain: White polyester curtain with ring hangers. Curtain has tie-back so it can be neatly stored when emergency equipment is not in use. Curtain has interior pocket for storing a smock to be used after contaminated clothing is removed.
Read moreQuick View -
Read moreQuick ViewGuardian Recessed Emergency Shower, Recess Mounted Shower Head MODEL : GBF1671
Application: Recessed emergency shower with ceiling mounted recessed shower head. Recessed shower conserves valuable floor space, while eliminating the clutter and obstruction created by conventional shower equipment. Unit can be installed in either a corridor or a lab room, close to where accidents might occur.
ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
Shower Head: 10” diameter stainless steel with 20 GPM flow control and flange for flush mounting in ceiling.
Valve: 1″ IPS brass stay-open ball valve with stainless steel “panic bar.” Pulling bar down activates shower; shower remains in operation until bar is returned to original closed position. Furnished with stainless steel access panel and 1″ IPS unions for valve.
Mounting: 16 gauge stainless steel cabinet with flange featuring 3/8” return for recessed mounting in wall.
Supply: 1″ NPT female inlet.
Sign: ANSI-compliant identification sign.
U.S. Patent 5,768,721
Note: ANSI Z358.1-2014 specifies that shower heads be installed no more than 96″ above the finished floor. This unit should therefore not be installed in ceilings over 8 feet. For higher ceiling heights, we recommend either the GBF1670 or GBF1672 showers.
Read moreQuick View -
Read moreQuick ViewGUARDIAN RECESSED SAFETY CENTER WITH DRAIN PAN, EXPOSED SHOWER HEAD MODEL : GSC2650A
Application: Recessed safety center with barrier-free eye/face wash and shower safety station, matching fire extinguisher housing, ceiling mounted exposed shower head, and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage. The integrated fire extinguisher housing creates a cohesive aesthetic for all safety equipment requirements in one location.
ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
Shower Head: 10” diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.
Shower Valve: 1” IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.
Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.
Mounting: Unit is comprised of (2) modular 16 gauge stainless steel cabinets. Each cabinet flange features 3/8” return for recessed mounting in wall.
Supply: 1” NPT female inlet.
Waste: 2” NPT female outlet.
Sign: ANSI-compliant identification sign.
U.S. Patent 5,768,721
Read moreQuick View -
Read moreQuick ViewGUARDIAN RECESSED SAFETY STATION WITH DRAIN PAN AND DAYLIGHT DRAIN, EXPOSED SHOWER HEAD MODEL : GBF2152
Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage. Rather than connecting to building drainage system, unit has 1” IPS stainless steel drain on front of unit for waste water. Front drain provides for less costly installation while facilitating regular testing of unit.
ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
Shower Head: 10″ diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.
Shower Valve: 1″ IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and re-directed to daylight drain for drainage out the front of unit. Unit remains in operation until cover is returned to closed position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.
Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.
Mounting: 16 gauge stainless steel cabinet with flange featuring 3/8″ return for recessed mounting in wall. Unit fits in standard 3-5/8″ deep wall.
Pipe And Fittings: Exposed pipe and escutcheon are brushed stainless steel.
Supply: 1″ NPT female inlet.
Waste: 1″ IPS stainless steel drain elbow on front of unit.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
Read moreQuick View -
Read moreQuick View
GUARDIAN RECESSED SAFETY STATION WITH DRAIN PAN, EXPOSED SHOWER HEAD MODEL : GBF2150
Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage.
ADA Compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
Shower Head: 10″ diameter stainless steel with 20 GPM flow control. Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.
Shower Valve: 1″ IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
Cover/Drain Pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
Eye/Face Wash Spray Head Assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water flow.
Eye/Face Wash Valve: 1/2″ IPS brass plug-type valve with O-ring seals. Furnished with in-line strainer to protect valve from debris and foreign matter.
Mounting: 16 gauge stainless steel cabinet with flange featuring 3/8″ return for recessed mounting in wall. Unit fits in standard 3-5/8″ deep wall.
Pipe And Fittings: Exposed pipe and escutcheon are brushed stainless steel.
Supply: 1″ NPT female inlet.
Waste: 2″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYE/FACE WASH, AUXILIARY DRENCH HOSE, STAINLESS STEEL BOWL MODEL : G1950HS
Application: Combination eye/face wash and shower safety station. Furnished with auxiliary drench hose for rinsing user’s eyes, face or body. Eye/face wash features a stainless steel bowl with two large FS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes and face.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eye/Face Wash Bowl: 11-1/8” diameter stainless steel.
Eye/Face Wash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Drench Hose Unit: Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single FS-Plus™ spray-type outlet head, self-closing valve with squeeze handle, 8 ft. reinforced PVC hose and wall hook.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 9-1/4″ or 19-5/8″ above finished floor by reversing lower pipe nipples.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
- GRN Green ABS plastic shower head.
- YEL Yellow ABS plastic shower head.
- SSH Stainless steel shower head.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYE/FACE WASH, HAND AND FOOT CONTROL, STAINLESS STEEL BOWL MODEL : G1950HFC
Application: Combination eye/face wash and shower safety station. Eye/face wash is activated by flag handle or foot treadle and features a stainless steel bowl with two large FS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes and face.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eye/Face Wash Bowl: 11-1/8” diameter stainless steel.
Eye/Face Wash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
- GRN Green ABS plastic shower head.
- YEL Yellow ABS plastic shower head.
- SSH Stainless steel shower head.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYE/FACE WASH, PLASTIC BOWL MODEL : G1950P
Application: Combination eye/face wash and shower safety station. Eye/face wash features a plastic bowl with two large FS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes and face.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eye/Face Wash Bowl: 11-3/4” diameter orange ABS plastic.
Eye/Face Wash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 9-1/4″ or 19-5/8″ above finished floor by reversing lower pipe nipples.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
- GRN Green ABS plastic shower head.
- YEL Yellow ABS plastic shower head.
- SSH Stainless steel shower head.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYE/FACE WASH, POLISHED CHROME CONSTRUCTION MODEL : G1950PCC
Application: Combination eye/face wash and shower safety station. Unit is constructed of polished chrome plated brass pipe, fittings and components for attractive appearance and superior durability. Eye/face wash features two large FS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes and face.
Shower Head: 10” diameter stainless steel with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eye/Face Wash Bowl: 11-1/8″ diameter stainless steel.
Eye/Face Wash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Pipe And Fittings: Polished chrome plated brass.
Supply: 1-1/4″ NPT female top inlet.
Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 8-1/4″ or 20-1/4″ above finished floor by reversing lower pipe nipples.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYE/FACE WASH, STAINLESS STEEL BOWL MODEL : G1950
Application: Combination eye/face wash and shower safety station. Eye/face wash features a stainless steel bowl with two large FS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes and face.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eye/Face Wash Bowl: 11-1/8″ diameter stainless steel.
Eye/Face Wash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4″ NPT female outlet. Outlet can be positioned at either 9-1/4″ or 19-5/8″ above finished floor by reversing lower pipe nipples.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
- HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
- GRN Green ABS plastic shower head.
- YEL Yellow ABS plastic shower head.
- SSH Stainless steel shower head.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYEWASH, ALL-STAINLESS STEEL CONSTRUCTION MODEL : G1991
Application: All-stainless steel combination eyewash and shower safety station. Stainless steel construction is ideal for highly corrosive environments and cleanroom applications. Eyewash features two GS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes.
Shower Head: 10″ diameter stainless steel with 20 GPM flow control.
Shower Valve: 1″ IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eyewash Bowl: 11-1/8″ diameter stainless steel.
Eyewash Valve: 1/2″ IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE seals.
Pipe And Fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4” NPT female outlet. Outlet can be positioned at either 8-1/4” or 19-3/8” above finished floor by reversing lower pipe nipples.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
Read moreQuick View -
Read moreQuick ViewGUARDIAN SAFETY STATION WITH EYEWASH, HAND AND FOOT CONTROL, STAINLESS STEEL BOWL MODEL : G1902HFC
Application: Combination eyewash and shower safety station. Eyewash is activated by flag handle or foot treadle and features a stainless steel bowl with two GS-Plus™ spray-type outlet heads that deliver a flood of water for rinsing eyes.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water flow.
Eyewash Bowl: 11-1/8” diameter stainless steel.
Eyewash Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position.
Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1-1/4″ NPT female top or side inlet.
Waste: 1-1/4″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6040 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 50 gallons (189 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency shower or combination safety station. Depending on water supply size and pressure, valve can supply multiple units.
- GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
- GRN Green ABS plastic shower head.
- YEL Yellow ABS plastic shower head.
- SSH Stainless steel shower head.
- AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eyewash or shower is activated. Furnished complete with flow switch and mounting hardware.
- AP250-015 Modesty curtain for mounting on safety station.
Read moreQuick View