-
Read moreQuick ViewGUARDIAN EYEWASH, WALL MOUNTED, STAINLESS STEEL BOWL MODEL : G1814
Application: Eyewash with stainless steel bowl for wall mounting. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/8″ diameter stainless steel.
Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.
Supply: 1/2″ NPT female inlet.
Waste: 1-1/4″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- BC Stainless steel bowl cover. Cover protects unit against contaminants. Cover is automatically raised when unit is activated.
- HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
- T Chrome plated brass tailpiece and trap with 1-1/2″ IPS waste connection.
- TP 1-1/2″ OD chrome plated brass tailpiece.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH,UNMOUNTED, STAINLESS STEEL BOWL MODEL : G1815
Eyewash, Unmounted, Stainless Steel BowlApplication: Unmounted eyewash with stainless steel bowl. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/8″ diameter stainless steel bowl.
Supply: 1/2″ NPT female inlet.
Waste: 1-1/4″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve, bowl and spray head assembly is factory assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- BC Stainless steel bowl cover. Cover protects unit against contaminants. Cover is automatically raised when unit is activated.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, 45 DEGREE PANEL MOUNTED MODEL : G5041
Application: Dual purpose eyewash/drench hose unit for 45 degree angled panel mounting. Unit meets the provisions of ANSI Z358.1 -2014 as both an eyewash and a drench hose. Unit may be left in the angle holder for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Angle flange for 45 degree panel mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- VB In-line vacuum breaker for installation between valve and spray head.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, DECK MOUNTED MODEL : G5022
Application: Dual purpose eyewash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the deck flange for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- HG Undercounter hose guide bracket to prevent hose from tangling or binding.
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- VB In-line vacuum breaker for installation between valve and spray head.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, DECK MOUNTED, BALL VALVE WITH FLAG HANDLE MODEL : G5028
Application: Dual purpose eyewash/drench hose with ball valve and flag handle for deck mounting. Unit meets the provisions of ANSI Z358.1 -2014 as both an eyewash and a drench hose. Unit may be left in the deck flange for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Eyewash assembly has deck flange for countertop mounting. Flange has handle locator guide to position spray heads facing forward at all times.
Supply: 1/2” NPT male inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- DC Stainless steel dust cover for each spray head.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- HG Undercounter hose guide bracket to prevent hose from tangling or binding.
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, DECK MOUNTED, BALL VALVE WITH FLAG HANDLE, WITH VACUUM BREAKER MODEL : G5028VB
Application: Dual purpose eyewash/drench hose with ball valve and flag handle for deck mounting. Unit meets the provisions of ANSI Z358.1 -2014 as both an eyewash and a drench hose. Unit may be left in the deck flange for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body. Vacuum breaker prevents external water and contaminants from seeping back into supply line.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Vacuum Breaker: Atmospheric vacuum breaker installed on outlet of valve. Vacuum breaker is installed 6″ above counter. Vacuum breaker is certified to comply with ASSE 1001/CSA-B64. Note: Check with code authority for compliance with local plumbing code.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Eyewash assembly has deck flange for countertop mounting. Flange has handle locator guide to position spray heads facing forward at all times.
Supply: 1/2″ NPT male inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- DC Stainless steel dust cover for each spray head.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- HG Undercounter hose guide bracket to prevent hose from tangling or binding.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, WALL MOUNTED MODEL : G5026
Application: Dual purpose eyewash/drench hose for wall mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 8’ reinforced PVC hose. 275 PSI maximum working pressure.
Mounting: Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times.
Supply: 3/8″ NPT male swivel-type inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- FSH 8 ft. flexible stainless steel hose in place of PVC hose.
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- VB In-line vacuum breaker for installation between valve and spray head.
Read moreQuick View -
Read moreQuick ViewGUARDIAN EYEWASH/DRENCH HOSE UNIT, WALL MOUNTED, 12’ COILED HOSE MODEL : G5046
Application: Dual purpose eyewash/drench hose with 12’ coiled hose for wall mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body. 12’ nylon retractable hose coils to eliminate trip hazard.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.
Hose: 12′ reinforced nylon retractable coiled hose. 180 PSI maximum rated working pressure.
Mounting: Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times.
Supply: 3/8″ NPT female inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
AVAILABLE OPTIONS
- G6020 Thermostatic mixing valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 13 gallons (49 liters) per minute at 30 PSI (2.1 bar) pressure drop. Valve can be used to supply emergency eyewash, eye/face wash or drench hose unit. Depending on water supply size and pressure, valve can supply multiple units.
- BP In-line dual check backflow preventer installed on inlet of hose. Note: Check with code authority for compliance with local plumbing code.
- VB In-line vacuum breaker for installation between valve and spray head
Read moreQuick View -
Read moreQuick ViewGuardian Eyewash/Drench Hose Unit, Wall Mounted, 12’ Coiled Hose, Ball Valve with Flag Handle MODEL : G5014
Application: Dual purpose eyewash/drench hose with ball valve and flag handle for wall mounting. Unit meets the provisions of ANSI Z358.1-2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body. 12’ nylon retractable hose coils to eliminate trip hazard.
Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Hose: 12′ reinforced nylon retractable coiled hose. 180 PSI maximum working pressure.
Mounting: Bracket with spring clips to hold unit on wall. Clips assure that spray heads face forward at all times.
Supply: 3/8″ NPT female inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water tested prior to shipment.
Read moreQuick View -
Read moreQuick ViewGUARDIAN HEATED SAFETY STATION WITH EYEWASH, BOTTOM INLET, RATED FOR CLASS I, DIVISION 2 ENVIRONMENT MODEL : GFR3110
- Meets the provisions of ANSI Z358.1-2014 as both an emergency eye wash and shower
- FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D
- For rapid first aid after an accident to prevent contamination of the body and eyes
- Easy operation of the emergency shower with a stainless steel handle
- The aerated plastic water jets ensure the water is a gentle spray
- Water flow for body shower: 20 GPM, water connection 1 1/4″ NPT
- Eye wash with 2 spray nozzles with self-regulating flow control, filter and dust covers
- Simple operation of the eyewash with flag handle
- Water flow for eye shower: > 3.2 GPM at 30 PSI
- Heat-tracing cable wraps around internal pipe and activates when pipe temperature falls below 75° F to maintain tepid water within unit
- Galvanized steel piping with UV-resistant orange ABS plastic jacket and polywthylene foam insulation
- Requires 120 VAC single phase power supply (240V option also available)
- With Bottom Inlet
Read moreQuick View -
Read moreQuick ViewGUARDIAN HEATED SAFETY STATION WITH EYEWASH, TOP INLET, RATED FOR CLASE I, DIVISION 2 ENVIRONMENT MODEL : GFR3100
Guardian Safety – Heated Safety Station with Eyewash, Top Inlet, Rated for Class I, Division 2 EnvironmentApplication: Electric heat-traced stations prevent freezing even in extreme conditions. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40°F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014.
Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 75°F. FM, UL, and CSA approved for Class I, Division 2, Groups B, C, and D.
Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 2, Groups B, C, and D. Requires 120 VAC single phase power supply.
Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless steel screws for easy maintenance.
Shower Head: 10″ diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1″ IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29″ stainless steel pull rod.
Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.
Eyewash Valve: 1/2″ IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2″ NPT port to drain water from spray heads after use.
Pipe And Fittings: Schedule 40 galvanized steel.
Supply: 1-1/4″ NPT female top inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.
Read moreQuick View -
Read moreQuick ViewGUARDIAN HEATED SAFETY STATION WITH EYEWASH, TOP INLET, RATED FOR CLASS I, DIVISION 1 ENVIRONMENT MODEL : GFR3200
Application: Class I, Division 1 rated electric heat-traced stations prevent freezing in extremely hazardous, cold weather conditions where flammable gases are routinely expected. Thermostat regulated units are heated by self-limiting heat-tracing cable wrapped around internal pipe. Units are intended for cold weather use down to -40°F. See ‘Tempering Valves’ section to ensure tepid water compliance with ANSI Z358.1-2014.
Heating Cable: Self-regulated with external termination guards. Thermostat activates when internal piping temperature falls below 50°F. FM, UL, and CSA approved for Class I, Division 1, Groups B, C, and D.
Electrical System: Unit is fully wired at factory. Junction box and components rated for Class I, Division 1, Groups B, C, and D. Requires 120 VAC single phase power supply. Heat-trace indicator light included. Note: In order to meet Class I, Division 1 requirements, approved conduit and fittings must be used during installation.
Jacket/Insulation: UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections are secured with removable stainless steel screws for easy maintenance.
Shower Head: 10” diameter orange ABS plastic with 20 GPM flow control.
Shower Valve: 1” IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 29” stainless steel pull rod.
Spray Head Assembly: Freeze-resistant with float-off dust covers and internal flow control.
Eyewash Valve: 1/2” IPS brass three-way self-draining stay-open ball valve. US-made with brass ball and PTFE seals. Includes 1/2” NPT port to drain water from spray heads after use.
Pipe And Fittings: Schedule 40 galvanized steel.
Supply: 1-1/4” NPT female top inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Factory tested prior to shipment. Ships fully assembled and crated.
Read moreQuick View