• 3M EZ-LINE Retractable Horizontal Lifeline – 7605060 (PRICE UNIT: EACH)

    60 ft. (18.3m) retractable cable horizontal lifeline system with built-in winch, tension and impact indicators.

    • 60 ft. (18.3 m) retractable system can be set at any length
    • Rugged 1/4″ (6.3mm) 7×19 Galvanized Cable lifeline
    • Ergonomic easy to carry case
    • Extremely lightweight and portable design
    • Weight Capacity : 141KG
    • Span Type : Single or Multi-Span
    • Maximum Number of Workers : 2 Per Span, 6 Total

    EZ-Line™ is the most user friendly and fastest horizontal lifeline system to install, remove and store on the market today! EZ-Line’s innovative retractable design allows the user to quickly and efficiently set-up any length of system in only seconds and dismantle it just as quick. The entire lifeline is retracted into an easy to carry case which eliminates large and bulky coils of cable that are difficult to set-up, relocate and store.
    Additionally, EZ-Line is 33% lighter than traditional systems providing ease-of-use and added worker satisfaction. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI-SALA® horizontal lifelines.
    We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points.

  • ACTSAFE ACX POWER ASCENDER

    SKYLOTEC ACTSAFE ACX Power Ascender

    • Application area: Rope access and/or rescue
    • Remote Control Range: 150m
    • Working load limit: 200KG
    • Battery Range at 20°C & 100KG load: 550m
    • Battery included: 2x Removeable Battery, POA-004 power supply
    • Charger: Yes
    • Charging time: 90 minutes
    • Emergency Stop & Descent function: Yes
    • Material: Aluminium, Nylon, Steel
    • Ascent Rate: 0 m/min – 24 m/min
    • Descent Rate: 0 m/min – 25  m/min
    • Compatible rope diameter: 11.00 mm
    • Max Noise Level: 76 dB(A)
    • Water Dust Resistance: IP 55
    • Gross Weight: 30KGThe ACX battery-powered hoist is a motorised system to ensure the transport of persons or loads to areas that are difficult to access and where occasional or recurring work is carried out. ACX is used, among other things, for cleaning facades or windows, for the maintenance of complex building structures, for the rotor blade maintenance of wind turbines or for transporting loads on masts.

      The ACX POWER ASCENDER considerably simplifies and accelerates work on complex structures and makes expensive access systems or lifting platforms superfluous. Countless rescue scenarios can also be carried out efficiently and with minimum effort with the ACX.

      ACX forms a highly flexible system for easy and cost-efficient cleaning or maintenance. In an emergency, the ACX can be controlled by remote control. The operation and use of the ACX can be learned in special training courses.

      – Simplifies and accelerates work on structures that are difficult to access
      – Gentle application
      – Control by remote control up to 150 m

     

     

  • ADVANCED ISO CONTAINER FALL ARREST POST MODEL : 8563161

    • The unique CE certified fall restraint solution.
    • Compatible with all ISO certified containers.
    • Provides an elevated anchorage point reducing fall clearance requirements.
    • Ensures total fall protection solution, even while working on a single container.
    • No tools or container modification required.

    Any application requiring workers to be on the top of an ISO Container: inspection, repair, maintenance, equipment fitting. DBI Sala is the world’s global leader in the production of fall protection equipment available over a number of stores. Fall arrest post is a kind of safety equipment which is intended for the fall protection.

    Fall arrest post is basically intended to be used where there are higher chances of component getting fall down. This is basically a kind of vertical post which is providing the support from its sides with which the component which is to be saved can be tied.

    DBI Sala Advanced ISO Container Fall Arrest Post is basically intended to arrest the fall of the ISO container. Many times there are chances of hazards if the container falls due to the presence of the corresponding substance in the respective container.

    This fall arrest post is quite compact and hence there are chances for transporting the same quite easily. One can transport it to the location where the required safety is to be provided to be used in the respective location. The post is allowing protection of 360 degrees for about 3 workers.

    The design is similar to a telescopic in nature with the feature of built-in levelling system. Material which is used is lightweight, corrosion resistant aluminium construction. It consists of a capacity of about 3 people of 136 kgs with a physical weight of 40 lbs.

    RM10,800.00
  • ASCORD SLIDING GUIDED FALL ARRESTER ON Ø 14 MM, 1 AM002 KARABINER MODEL : AN065

    Fall arrester sliding on anchorage line stranded rope Ø 14 mm (rope sold separately). Opening type fall
    arrester equipped with automatic locking, non-inverting device, energy absorber with fall indicator. 1
    carabiner AM002.
    Stainless steel.
    COLOUR
    Steel
    SIZE
    No size

  • BEAM TROLLEY MODEL : 2103143

    • Installs onto 3 in. to 8 in. wide I-beam flange (7.6-20.3cm) up to 11/16″ thick (1.7cm)
    • Complete hands-free horizontal mobility
    • Ideal for use with self retracting lifeline
    • Easy to use dual adjustment dials
    • High strength steel construction
    • Extremely rugged and corrosion resistant
    • Rotating D-ring tie-off point is fixed in center
    • Double-shielded wheel bearings
    • Built-in guards protect wheels

    Trolley fits 3 in. to 8 in. wide I-beams (7.6-20.3cm) up to 11/16″ thick (1.7cm).

    Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2 to 1 safety factor.

  • CARABINER OVAL SCREW H-176-SC

    Art. no.: H-176-SC
    EAN: 4030281286318
    International Standard: UIAA 121
    Standard: EN 12275-H:2013, EN 362-B:2008
    Max. opening: 20 mm
    Breaking load, major axis: 24 kN
    Breaking load, minor axis: 7 kN
    Breaking load, open: 8 kN
    E-class number: 40-02-01-05
    Customs tariff number: 76169990
    Size: 109 x 58 mm
    Weight: 0.08 kg
    Locking system: Screw
    Material: Aluminium

  • DBI-SALA ADVANCED COUNTERWEIGHT DAVIT BASE MODEL : 8512894 MID YEAR PROMO

    The Advanced Counterweight System is composed of a central base unit to

    accommodate a variety of anchoring options, positioning and adjustment

    legs, and extension assemblies. Anchoring options include a weight rack

    for counter balanced applications, and a wheel pad assembly to allow

    counter balance of the unit with an attendant vechicle.

  • DELTAPLUS SELF RETRACTABLE FALL ARRESTER MEDBLOC MODEL : AN13006C2

    MEDBLOC 6 M IN POLYESTER WEBBING 25 MM + 1 AM016 – HORIZONTAL USE

    Self retractable fall arrester with polyester webbing 25 mm. ABS protection. Swivel with fall indicator.
    1 carabiner AM016.
    Horizontal use tested.

    Carter: Plastic.
    Carabiner: Steel.
    Swivel: Aluminium.

    RM850.00
  • EZ-STOP 100% TIE-OFF SHOCK ABSORBING LANYARD MODEL : 1246193

    6 ft. (1.8m) elastic web double-leg 100% tie-off with aluminum snap hook at center, aluminum rebar hooks at leg ends. EZ Stop shock absorbing lanyards combine a set of “industry first” advancements, with popular features making them the workhorse of the industry. Today’s EZ Stop represents the culmination of decades of design, research, manufacturing know how and on the job performance. EZ Stop lanyards are as tough as the guys who use them. They feature world’s smallest and lightest shock absorber, water repellant and abrasion resistant webbing and a build quality that is second to none. In addition, our exclusive Vectran energy management materials provide second to none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and it’s unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way even with gloves on. * 6 ft. (1.8m) double-leg 100% tie-off lanyard * Stretches in reaction to your movements * Extremely compact and lightweight * Exclusive Vectran energy absorption system

  • FULL BODY HARNESS MODEL : 1390033

    Specifications 

    1. Attachment one chest & dorsal d-ring for rescue & fall arrest, side d-ring for work positioning
    2. Adaptability adjustable chest and thigh strips
    3. Ergonomic ideally positioned sit-strap for extended comfort
    4. Material 44mm polyester web
    5. Colour dual-color webbing for easy wearing

    Features 
    1. Economically priced that meet CE performance standard
    2. Universal sized harness that fits most shapes and sizes
    3. Polyester webbing for durability
    4. Polyamide twisted rope lanyard 12mm

    Details

    • 1 chest & D-ring for rescue & Fall arrest, belt for work positioning
    • Adjustable chest and thigh strips
    • Dual-color webbing for easy wearing
    •  Ideally positioned sit-strap for extended comfort
    •  Net weight: 2,100g
    •  Material: Strap: 44mm Polyamide web
    • -Static strength: >15kN
  • FULL BODY SAFETY HARNESS WITH FRONT BACK D RING MODEL : 1390024

    3M 1390024 Protecta First Full Body Safety Harness : 5 Points Adjustment with Chest & Dorsal D-Ring EN 361:2002 & PSB Approval Standard. 5-point adjustment full body harness. Chest Ring + Darsal D-Ring. Adjustable Chest & Thigh Strips. Ergonomic, ideally positioned sit-strap for extended comfort. 44mm Polyster web. Dual-colour webbing for easy wearing.

  • HONEYWELL LIGHTWEIGHT STAINLESS STEEL FIXED BEAM ANCHOR MODEL : 8815-24

    Fits Flange Size 12″ to 24′

    HoneyWell Lightweight Stainless Steel Fixed Beam Anchor Model : 8815-24

    RM1,800.00